Oxygen Generators (P.S.A Type)
We manufacture and supply superior quality
oxygen generators for varied requirements of our clients. Designed in
compliance with strict industry standards, our oxygen generators are known
for their easy operation, handling, least maintenance cost and durability.
Based on microprocessor controlled technology, these generators have found
wide applications in areas like drinking water treatment, medical area,
environment air treatment and many more.
How Oxygen is Produced
Separation of Oxygen from air is effected by
P.S.A (Pressure Swing Adsorption) process where adsorption of Nitrogen is
carried out by using synthetic zeolite, known as molecular sieves. Oxygen
generator consists of two adsorption vessels, filled with molecular sieves.
These vessels are alternately charged with compressed air where, Nitrogen
and other impurities are adsorbed and oxygen flows into an oxygen surge
tank. After the adsorption cycle, one vessel is depressurized to atmospheric
pressure, thereby discharging the adsorbed nitrogen and sieve bed is
regenerated by counter current oxygen flow from the buffer tank.
Electric Power Required
3 Phase electrical supply is needed. Power
Control Switch Gear Panel is a part of the Plant. Actual Power consumption
is 1-1.5 KWH per cubic meter of Oxygen produced.
Compressed Air
Air will be supplied by an oil free air
compressor or can be drawn from an existing compressed air supply of client
at 4-6 bars. Air passes through a set of filters prior to entering in PSA
unit.
Oxygen Concentration
Our Standard generators produce Oxygen gas of
93 % ± 2% concentration which is sufficient for all important medical
and industrial applications. Moisture and CO2 present in air also absorbed
and rejected. The Oxygen flow is, therefore, very dry and contains only
Argon and small percentages of Nitrogen.
Oxygen Pressure
Adjustable 0-3.5 kg / cm². For higher
pressure, an additional Oxygen compressor can be provided
Operation Costs
Running costs of Oxygen generators are
substantially lower than buying Oxygen from the market. The only major
operating cost is electric power for the compressed air. The production of 1
Nm³ oxygen requires an average 1-1.5 KWH. (Lesser for large
installations).
Installation
Standard models are delivered completely
assembled and ready to plug in. Special requirements can be complied with a
specific requirement
Process Control
The Process of Oxygen production is fully
automatic and takes 15 to 30 minutes to completely stabilize & reach the
required purity level. Thus oxygen can be produced as and when required.
Medical Oxygen Systems
Our Oxygen generators are most suitable for
medical application in providing uninterrupted supply of oxygen round the
clock. As per US pharmacopeia 93% ± 2% purity oxygen is suitable for
Hospital Applications. Fully automatic Hospital Oxygen system can be
supplied with reserve oxygen supplies.
Our Oxygen generators are most suitable for medical application in providing
uninterrupted supply of oxygen round the clock. As per US pharmacopeia 93% ±
2% purity oxygen is suitable for Hospital Applications. Fully automatic
Hospital Oxygen system can be supplied with reserve oxygen supplies.
Maintenance
Generators are virtually maintenance free with
only periodic change of filter elements.